Getting started
How to start a handyman business
How do you start a handyman business?
Decide exactly which jobs you will take, check whether your state licenses or registers that work, form a business entity and get an EIN, buy general liability insurance before the first job, open a separate business bank account, set an hourly rate that covers overhead and unbilled time, and claim your Google Business Profile. The paperwork is usually a week of evenings; the licensing check is the part that varies most by state.
What a handyman business actually is
A handyman business sells small-scope skilled labor. The work is broad and shallow rather than narrow and deep: a leaking faucet cartridge, a sticking door, a run of rotten trim, a ceiling fan swap, a bathroom accessory install, a fence panel, a dryer vent, a punch list a homeowner has been ignoring for a year. The customer is buying the fact that one competent person shows up, has the parts, and finishes it, rather than coordinating four specialists for four small jobs.
That breadth is the business model and it is also the legal boundary. In most of the country a handyman can legally do a great deal of repair and maintenance work, but there are categories that require a specialty license no matter how small the job is: most electrical work beyond replacing a fixture or a device, most plumbing beyond replacing fixtures and trim, anything touching gas, HVAC refrigerant work, and anything structural. There are also states where the general repair work itself needs a license or a registration once a job crosses a dollar threshold.
So the first real decision is not the business name or the logo. It is the scope. Everything after it (what you get licensed for, what insurance you buy, what you charge, what you advertise) follows from the list of jobs you have decided to say yes to.
Step 1: Decide what work you will and will not take
Write two lists before you write anything else. The yes list is what you advertise. The no list is what you refer out, ideally to a licensed trade who refers back. New owners skip this step, take everything, and then lose money on the jobs they were slowest at.
- Start from what you are already fast at.Speed is margin. A task you can do in forty minutes and someone else needs two hours for is where your rate stops being a negotiation. Build the yes list from the work you have already done a dozen times, not the work you would like to learn on a paying customer.
- Put a hard line around licensed trades.Electrical, plumbing, HVAC, and gas each have their own licensing in essentially every state. Replacing a light fixture, a switch, a faucet, or a toilet is usually within reach for a general repair operator, and running new circuits or repiping is usually not. Confirm where the line sits where you work, because it moves, and put the far side on the no list.
- Decide about roofs, ladders, and heights now.Gutter cleaning and second-story work are common handyman requests, and they are also where the injuries and the insurance exclusions live. Check whether your general liability policy covers work above a certain height before you quote it, not after you fall.
- Decide about anything that can flood or burn.Water heaters, supply lines, dishwashers, and washing machine hookups are quick jobs with expensive failure modes. Many operators still take them; the point is to take them knowingly, with the right coverage, and never to take them as a favor at a discount rate.
- Say no to structural, mold, asbestos, and lead disturbance.Load-bearing work needs an engineer or a licensed contractor. Mold and asbestos are separately regulated almost everywhere. Disturbing paint in pre-1978 housing brings federal lead-safe renovation rules into play. These are not gray areas to feel out on a job.
- Write the no list down and give it to your voicemail.The list is only useful if it survives a phone call from a nice person who wants one small exception. Put the referral names in your phone so that saying no takes five seconds and makes you look like a professional instead of a dead end.
A tight scope also makes you easier to describe, which makes you easier to recommend. "He does everything" is a weaker referral than "he fixed all our doors and hung the TV in one afternoon."
Step 2: Pick a business structure
There are three structures most handyman businesses actually choose between, and the practical difference is smaller than the internet suggests.
A sole proprietorship is what you are by default the moment you take money for work. It costs nothing to form, it files on your personal return, and it gives you no liability separation at all. Many operators genuinely start here for the first few months while they find out whether the business is real. If you do, understand clearly that a claim reaches your personal assets, and that your insurance is doing all the protecting.
A single-member LLC is the common answer once there is real revenue. It is cheap in most states, it separates business liability from personal assets when you respect the separation, and by default it is still taxed exactly like a sole proprietorship, so your tax filing barely changes. The separation is the part people get wrong: an LLC that pays the owner's mortgage out of the business account and has no operating agreement is an LLC a lawyer will argue is not really separate.
An S corporation is a tax election, not a separate structure, and it is usually a later move. Once profit is high enough that the self-employment tax on all of it hurts, electing S corp treatment lets you pay yourself a reasonable salary and take the remainder as a distribution that is not subject to self-employment tax. It also brings payroll, more filings, and an accountant you now actually need. There is a profit level where it pays for itself; below that level it is paperwork you are buying for no reason. Ask an accountant to run your specific numbers rather than following a threshold you read in a forum.
Whichever you pick, get an EIN from the IRS. It is free, it takes minutes online, and it lets you open a business bank account and give a W-9 to commercial customers without handing out your Social Security number.
Step 3: Check licensing before you advertise
This is the step where new owners get hurt, because the answer is genuinely different in different places and a lot of the advice online is written as if it were uniform.
There are three broad patterns. Some states license general repair and improvement work at the state level, often with an exemption below a dollar threshold that counts labor and materials combined. Some states do not license it but require a registration, a bond, or both before you can advertise or contract with homeowners. And some states leave general repair work entirely to cities and counties, which means the answer changes when you cross a town line.
Layered on top of all three, the specialty trades (electrical, plumbing, HVAC, gas) are licensed separately essentially everywhere, and those licenses are not optional at any job size.
The practical move is to spend one afternoon before you take a single paying job. Find your state's contractor licensing board or consumer affairs agency, read their own page on what requires a license, then call the clerk in the city or county where you will work most and ask what they require locally. Write down what you were told and when. Rules change with legislative sessions, and a note that says which agency you asked and on what date is worth a lot if the question ever comes up.
We have written the longer version of this, including the three regimes, how thresholds are usually calculated, and how to check your own state in about twenty minutes, on the licensing page.
Why we do not print a fifty-state dollar table
Threshold figures, bond amounts, and exemption rules change by legislative session, and a stale table is worse than no table because it reads as authoritative. Any site that shows you a tidy fifty-state grid is asking you to trust a snapshot with no date on it.
So we teach the mechanism and name the agency instead. Confirm the current figure with your state board before you quote a job that might sit near the line, and keep a note of the date you checked.
Step 4: Get insured before the first job
Insurance is the one setup cost that is genuinely not optional. Not because a rule forces you (though some states and most commercial customers do), but because a single bad afternoon in someone's house can cost more than a year of profit. Here is what the coverages actually do.
- General liability is the base policy.It covers bodily injury and property damage you cause to others: the tile you crack, the pipe you nick, the customer who trips over your cord. Almost every commercial client, property manager, and referral network will ask for a certificate of insurance before you set foot on site, and homeowners increasingly ask too.
- Tools and equipment coverage is separate.General liability does not replace your own stolen tools. That is inland marine or a tools and equipment endorsement, usually cheap, and worth having the day your van is worth breaking into. Photograph and list your tools with serial numbers now, because you will not remember the inventory after a theft.
- Commercial auto is not the same as your personal policy.A personal auto policy can deny a claim on a vehicle used primarily for business. If you are driving to jobs with tools and materials, talk to your agent about a commercial policy or a business-use endorsement before you find out the hard way.
- Workers compensation the moment anyone else works for you.Requirements vary by state and by how many people you have, and misclassifying a helper as a subcontractor to avoid it is one of the most expensive mistakes in this trade. Ask your state's workers compensation agency directly, and get certificates from every sub you use.
- Ask specifically about your riskiest categories.Height limits, water heater work, hot work, and mold or lead exposure are common exclusions. Read your own policy's exclusions once, out loud, and ask the agent what happens in a claim for each item on your yes list.
- A bond is not insurance.Where a surety bond is required, it protects the customer, not you; if the bond pays out, the surety comes after you for the money. It is a licensing requirement to satisfy, not a substitute for liability coverage.
Get quotes from an independent agent who writes for contractors rather than the first online form you find. Premium varies enormously with your state, your scope, your payroll, and your claims history, so anyone quoting you a national average price is guessing.
Step 5: Set up the money before the money arrives
The financial plumbing takes an afternoon and prevents most of the pain new owners describe in year one.
- A separate business bank account, always.Mixing personal and business money is the fastest way to lose the liability protection you paid to form, and it turns bookkeeping into archaeology. Open the account the same week you get the EIN.
- Bookkeeping from job one, not from tax season.Whatever software you pick, the discipline matters more than the brand: every invoice recorded, every receipt captured the day you buy the material, every mile logged. Reconstructing nine months of receipts in April is a genuinely awful week and it always costs you deductions.
- Set aside tax money as it comes in.Nobody is withholding for you. Self-employment tax plus income tax means a meaningful slice of every payment is not yours. Move a percentage into a separate account on the day you get paid, and talk to an accountant early about quarterly estimated payments so you are not hit with an underpayment penalty.
- Find out how sales tax works on labor and materials in your state.Some states tax repair labor, some do not, some tax materials to the contractor rather than the customer, and some treat improvement and repair differently. This is a genuine state-by-state question and the wrong assumption compounds quietly for years.
- Accept card and digital payment from the first job.The processing fee is far cheaper than the days you wait for a check and the awkward second phone call. Being easy to pay is part of being easy to hire.
- Decide your deposit policy before you need it.For material-heavy jobs, taking a deposit that covers materials is normal and reasonable. Decide the rule once, write it on the estimate, and apply it consistently rather than negotiating it under pressure on a job you want.
Step 6: Set a rate before you take the first call
The single most common failure in a new handyman business is not lack of work. It is charging a number that felt reasonable, staying busy at that number, and discovering a year later that busy was not the same as profitable.
The reason is unbilled time. You do not get paid to drive, to buy parts, to write estimates, to chase invoices, to answer the phone, or to do your books, and those hours are a large fraction of a working week. A rate built from what you used to earn per hour as an employee ignores all of it, plus the overhead an employer used to carry: insurance, vehicle, tools, phone, software, taxes, and the weeks you do not work.
Build the number from the bottom instead: what you need to earn in a year, plus real overhead, divided by the hours you can actually bill. Then sanity check it against what your market will bear and adjust the offer, not the arithmetic. The pricing guide walks through that calculation with a fully worked example, plus how to structure minimums, flat rates, and change orders.
Step 7: Build the smallest system that gets you found
You do not need a brand, a logo package, or a fifteen-page website to start. You need to be findable, credible, and easy to contact, in that order.
Claim and complete a Google Business Profile. For a local service business this is the highest-leverage free thing that exists, and it is where the map results come from. Fill in every field, set your service area, pick accurate categories, add real photos of your own work, and start collecting reviews from day one.
Get a simple website with your service area, the list of work you do, real photos, and a phone number that is a tappable link on a phone. Its only job is to convert someone who already found you, so speed and clarity beat design flourishes.
Then tell every person you already know, specifically. Not a broadcast post, but a sentence naming what you do and where. Early work in this trade comes from people who already trust you, and the first ten jobs are almost always personal network plus the map pack.
The customer acquisition guide covers each channel in depth, including which lead platforms are worth it, how to build a review engine, and what to do in a slow week.
The first 30 days, in order
A realistic sequence. The order matters more than the speed: do not advertise before you have checked licensing, and do not take a job before you have coverage.
| Days | Task | Why it comes here |
|---|---|---|
| 1 to 3 | Write the yes list and the no list | Everything downstream (licensing, insurance, pricing, advertising) depends on the scope of work you have actually chosen. |
| 3 to 5 | Check state and local licensing for that scope | This can change the scope. Better to find out before you have printed anything or promised anyone. |
| 5 to 7 | Form the entity and get the EIN | The EIN is free and immediate, and the bank will ask for it. |
| 7 to 10 | Open the business bank account and set up bookkeeping | Starting clean is nearly free. Cleaning up later is not. |
| 7 to 14 | Get general liability quotes and bind coverage | Independent agents take a few days. Nothing gets scheduled before the policy is active. |
| 10 to 14 | Build your rate and your flat rate menu | You want the number settled before the first person asks, not improvised on the phone. |
| 12 to 18 | Claim the Google Business Profile and complete every field | It takes time to verify, so start it early. It is the main local discovery surface. |
| 14 to 21 | Put up a simple, fast site with your service area and phone number | It converts the people the profile sends you and gives you somewhere to point. |
| 18 to 25 | Tell your personal network specifically what you do and where | The first jobs come from trust you already have. |
| 21 to 30 | Take the first jobs and ask every single customer for a review | Reviews compound. Starting the habit on job one is worth more than any ad you could buy in month one. |
Note.Timelines assume you are doing this around existing work. Licensing and insurance are the two steps with external waiting periods, so start both earlier than feels necessary.
What the first year usually looks like
This is the long, honest version. It is folded up because it is a lot of words, not because it is optional reading. Every word is on the page.
Open the honest first-year walkthrough
Months one to three: the network months
Almost all of the work comes from people who already know you, plus whatever trickle the Google Business Profile produces while it is new. The jobs are small, the schedule is lumpy, and there is a strong temptation to say yes to everything at whatever price gets the yes.
The work of these months is not marketing. It is finding out how long things actually take you, building the flat rate menu from real jobs, and getting the first reviews on the board. Track your hours honestly, including the driving and the parts runs, because that data is what makes your rate real instead of theoretical.
Months four to six: the underpricing reckoning
This is usually where owners discover the gap between busy and profitable. The calendar is full, the bank account is not, and the reason is almost always some combination of a rate set too low, a minimum that does not cover the drive, and free estimates eating a day a week.
The fix is unglamorous: raise the rate for new customers, introduce or raise the minimum, start charging for estimates that require a site visit on complex work, and stop taking the category of job you are slowest at. Most owners find they can drop the bottom fifteen percent of jobs and earn more.
Months seven to nine: the repeat engine starts
If the work has been good, past customers start calling back and referring. This is the point where the business becomes predictable, and it is entirely a function of how you treated the first fifty jobs: showing up when you said, cleaning up, explaining what you found, and following up.
It is also where the administrative load becomes real. Quoting, scheduling, invoicing, and chasing payment start to take a full day a week. Owners who do not build a system here stay stuck at the ceiling of one person's calendar for years.
Months ten to twelve: the first fork in the road
By now you have a rate that works, a schedule that is booked out, and more demand than hours. There are three legitimate directions and they are genuinely different businesses.
You can stay solo and raise prices until demand matches your calendar, which is the highest quality of life and the lowest ceiling. You can specialize into the two or three job types with the best margin and become the person for those. Or you can add a helper and start the slow, expensive process of building a company, which lowers your income before it raises it.
None of the three is wrong. What is wrong is drifting into the third one by accident, because a crew built without systems, pricing, and cash reserve is how profitable solo operators turn into stressed unprofitable owners.
The costs nobody budgets for
- Unbilled hours.Estimates, parts runs, scheduling, invoicing, and bookkeeping are real hours that no customer pays for. Budget them into your rate rather than resenting them.
- Vehicle wear.A work vehicle running local routes with a load ages fast. Tires, brakes, and a transmission are not surprises, they are scheduled costs you have not scheduled yet.
- Tool replacement and consumables.Blades, bits, abrasives, fasteners, caulk, and batteries are a steady monthly bleed that feels like nothing per trip and adds up to real money per quarter.
- The callback.Every operator eats some rework. Price so that a callback does not wipe out the job, and treat the callback rate as a number you actually track.
- Seasonal slow weeks.Weather, holidays, and the post-holiday lull are predictable. A cash reserve turns them from a crisis into a quiet week you can use for maintenance and marketing.
Questions
Frequently asked questions
Do I need a license to be a handyman?
How much does it cost to start a handyman business?
Should I form an LLC or stay a sole proprietor?
What insurance does a handyman need?
How do I get my first handyman customers?
What jobs should a handyman refuse?
Can I run a handyman business part time?
How long does it take to start making money?
Work with us
Want someone to run the marketing while you run the jobs?
Everything on this site is free and stays free. Some owners read it, build the system themselves, and never need us; that is a completely fine outcome. Others get to the point where the work is coming in faster than the marketing is getting done, and they would rather hand that piece off.
That is where we come in. The work is done for trades businesses, and it is the boring, compounding kind:
- A site that loads fast, says what you do and where you do it, and turns a visitor into a phone call.
- A Google Business Profile that is filled out properly, posted to, and pulling map-pack calls in your service area.
- A review engine so happy customers actually leave the review instead of meaning to.
- Local pages for the towns you serve, written like a person wrote them.
- Honest tracking, so you know which jobs came from which channel instead of guessing.
Fill in the form and tell us what is actually going on. You will get a real reply from a person, and if the honest answer is "you do not need us yet," that is what you will hear.